The existence of mine car is a common mechanical equipment in many mining production. Our company is an experienced narrow gauge mine car production enterprise. With the continuous progress and development of social economy, the model of tramcar is gradually changing. Among them, side dumping mine car is a common type of mine car. I hope you can briefly understand the details of the work of side dumping mine car.
When assembling the narrow gauge mine car bearing, carefully check the dimensions of various parts, ensure that the radial and axial clearances of the assembled bearing meet the regulations, and inject sufficient lubricating grease. The wheel set bearing of mine car shall be oiled at least once every half a year and must be cleaned and inspected once a year. All damaged bearings, circlips and other parts must be replaced.
When the narrow gauge mine car is overturned 90 degrees or 180 degrees, the 5-point steel wire rope sleeve shall be used, and the lifting position shall be aligned when starting.
In case of shaft breaking and wheel dropping accidents under the side dumping mine car, contact the transportation dispatching in advance. Guard shall be set at the front and rear of the train, and special personnel shall be responsible for commanding and handling.
Doing a good job in the details of the use of the mine car can not only ensure the production efficiency, but also help to improve the service life of the mine car. If you want to know about other aspects of the mine car, you can call the company for consultation.
