PRC Series Coal Mine Level Roadway Man Car

Introduction of

PRC Series Coal Mine Level Roadway Man Car

The coal mine level man cars are pulled by traction locomotives and run in columns. In order to be smooth during operation, a spring buffer device is added. When starting or stopping, it can be kept stable. There is a buffer spring on the vehicle's traction device.

1. There are front and rear plates and metal canopies for the PRC laneway passenger carriages. The exterior steel plates of the carriages are made of 2mm thick steel plates. The interior uses 0.5mm thick stainless steel plates for the carports. The lower part of the car body uses yellow enamel and the upper part uses blue enamel. The body is streamlined, and the carport uses thick square tubes as the skeleton. The car floor adopts pattern steel plate and the chassis brush anti-rust paint. Install high-strength steel car chairs, 12 per car. The outside of the car body should be equipped with indicator lights (LED explosion-proof type) on both sides, each car must be no less than 6 inches (a car has a current source).

 

2. The open wheel pair uses tapered roller bearings (30310 type); the material of the meeting head is polyurethane, and the installation type is single-head type; the coupling adopts locking structure, and the steering gear, coupling and bumper adopt spring shock absorption.

MAIN PARAMETER OF

PRC Series Coal Mine Level Roadway Man Car

product name		Dimentions mm	Rail gauge mm	Bogie center distance mm	Passenger number	Min. curve radiusm	Traction heightmm	Weight kg
		Length x width x height
Man car	PRC18-9/3	4300x1400x1525	900	1500	18	8	320	1950
Man car	PRC12-6/3	4280x1020x1525	600	1500	12	8	320	1525

PHOTOS OF

PRC Series Coal Mine Level Roadway Man Car

PHOTOS OF

PRC Series Coal Mine Level Roadway Man Car

• 

  Underground Rail Shuttle Mine Car

• 

  Small Coal Mine Shuttle Mine Car

• 

  Large Shuttle Mine Car

Product comment

PRC Series Coal Mine Level Roadway Man Car