Side dump mine car
It consists of movable side doors on one or both sides, pull rods, unloading curved rails, and overturned car boxes. During driving, use the unloading curve of the unloading station to open one or both unloading doors for unloading. The commonly used volume is 2.2~5.5m ³。
Single side curved rail side dump mining car: One or both sides of the car can be opened, and the mining car is tilted by means of the unloading curved rail installed on the unloading point. The pull rod opens the side door for unloading.
Bottom dump mine car
One or both sides of the car can be opened, and the car can be tilted by means of the unloading curve rails installed on the unloading point. The pull rod opens the side door for unloading (side unloading type) or the car bottom plate is opened backward or to one side by gravity for unloading (bottom unloading type).
It consists of a car body, a wing plate, and a movable car bottom, and includes an integral car bottom unloading type, a two section car bottom longitudinal bottom unloading type, and a two section car bottom transverse bottom unloading type. During unloading, when the mining car is running, the car box with wings runs on the carrier wheel group, and the movable car bottom gradually opens and unloads along the unloading curve, then gradually closes during driving. The commonly used volume is 3.3~5.5m ³。
Shuttle mine car
The bottom plate of the shuttle mine car is a scraper conveyor. During loading, the front end of the mine car is filled first, and the conveyor gradually moves the loaded material towards the rear end. The shuttle mine car is continuously filled and unloaded by the conveyor. The shuttle mine car has a large volume and high efficiency, which is named for its frequent shuttling.
