In the mining engineering, the construction conditions are complicated. The indispensable transportation means is the mine cart. The MC series Side Dumping Mine Car is a model of the mine cart. It is driven by a tractor and a winch. The rock loader and the ore sliding gate discharge system are matched and loaded, and the ore lump does not exceed 600 mm. According to the load capacity of the mine car, the load is guided to the dedicated curved track unloader by traction. When the box is turned horizontally into a large discharge angle, the door is also opened to a large program. At this time, the unloading of the mine car is completed. When returning, the mine cart is automatically closed again through the curved door.
MC series Side Dumping Mine Car are widely used. They are mainly suitable for metallurgy, mining roadways, coal mines, railways, highway tunnels, underwater culverts, diversion tunnels, diversion tunnels, culverts, etc. Slagging transportation equipment.
The Side Dumping Mine Car replaces the mine transportation tools of the older dump bucket mining truck. It combines its simplicity and convenience, increases its storage capacity, is light, not bulky, flexible, and simple, and has the following characteristics: Can self-unloading. Side-loading type mining truck is a kind of high-efficiency, self-unloading operation equipment. It has no capacity and needs to be used with traction locomotive. Side Dumping Mine Car is suitable for mine, tunnel, engineering construction and other departments of tunnel, indoor and open-air rail transportation operations. Driven by tractor and winch, it can be combined with rock drill, vertical claw rock loader and ore sliding gate discharge system to load the ore. The ore block does not exceed 600 mm. According to the load capacity of the ore truck, Traction power is directed to (the running speed does not exceed 1m / s) a dedicated curved rail unloader. One or both sides of the carriage can be opened. The mine cart is tilted by the discharge track installed on the discharge point, and the side door is opened by the pull rod to discharge the mine. The truck is suitable for loading ore and sand with a block size of more than 500mm. When loading bulk materials, its free fall height should be less than 1m (from the top surface of the car).
