1. This Side Dumping Mine Car can be used in underground, ground and high temperature places, but when used in high temperature places, some parts, such as rubber bumpers, should be replaced.
2. This rollover Side Dumping Mine Car can be used alone or in series. The number of serial connections is determined according to the conditions of use, geographical conditions and traction equipment. The maximum traction force allowed by the connector must not be exceeded.
3. The movable pin end of the Side Dumping Mine Car is opposite to the fixed pin end equipped with a three-ring chain. The two mine carts slowly approached, rotate the movable bolt to make the pin head on the bolt align with the groove in the bolt lock ring, pull out the bolt, and at the same time point the three-ring chain to the groove of the mate. When the two mates touch, the three-ring The chain stretches into the head, inserts the pin into the lock ring and rotates half a circle.
4. When Side Dumping Mine Car are in operation, check whether the wheels are flexible and whether the strength of the anti-dropping bolts is sufficient. Especially when the side-dumping mining carts run in inclined roadways, wire ropes must be used. Before driving, the hook must be carefully checked for safety ropes, can pins, can rings and other plug-in connection safety devices, which must be safe and reliable. If the dump truck derails in the inclined lane and other faults, it should stop immediately. The driver should stick to his post and press the brakes to prevent sports cars.
