In order for the Side Dumping Mine Car to operate normally, an inspection and maintenance system should be established. The inspection and maintenance of Side Dumping Mine Car are divided into the following aspects.
1. Frequent check ┄┄┄┄┄┄┄┄┄┄┄ every day
2. Repair inspection┄┄┄┄┄┄┄┄┄ once a month
3. Frequent maintenance┄┄┄┄┄┄┄┄┄┄┄ once a month
In addition, curved track dump trucks are also frequently checked:
1. Check whether the bolts on the fasteners are loose;
2. Check whether the condition of the support frame is normal;
3. In particular, check whether the unloading curved track is loose, and the panel is uneven and deformed;
4. Check whether the wheelset is flexible. In addition to the items mentioned above, other parts must be checked frequently to avoid affecting the safe production of the mine.
Rules for the use of rollover mining carts: To be able to work flawlessly and trouble-free, the mining carts must be well maintained and observed.
1. The load on the Side Dumping Mine Car must not exceed the specified value.
2. The connection device fails to work and it is prohibited.
3. The frame rigidly collides with the wheel axle when it is shaken. It is prohibited to use it when the underframe and wheelset are faulty to avoid damage to the axle.
4. Turning correction should be carried out when the wheel wear is greater than 8mm, and the minimum size of correction is φ341.
5. If the unloading curved Side Dumping Mine Car is loose or deformed, the curved track panel must be fastened and replaced, and it is absolutely prohibited to delay.
