Mine car are common mechanical equipment in mining production today, and are key equipment to improve mining production efficiency. The company has been engaged in coal mining car production research for many years and is a trusted and recognized key mining cart company. Regarding mine carts that have not been tested How to check it? The editor made a brief summary.
1. Before starting a mine car that has not been tested, use a manual or crane to move the mine car for 2 or 3 turns to avoid collisions.
2. The mining cart are not allowed to be started under load. Starting under load will cause electrical trips or damage to mechanical parts, so check whether there are ore or iron in the crushing cavity.
3. In order to ensure the coal mining car qualified product size, the width of the discharge port should be checked.
4. Check whether various electrical interlocking coal mining car and audio signals are correct and easy to use.
5. Check the oil level and oil temperature in the oil tank. If the oil temperature is lower than 20 degrees, you should not drive. At this moment, you must use an electric heater or heating water.
6. Check the oil pressure of the locking cylinder, and the adjusting ring can be activated under the locked state.
The above six points are the basic inspection skills of mining cart. I hope that our customers and friends can easily grasp and understand, and provide support and help to ensure more perfect use of mine carts.
