The use of mining carts provides support and help to improve the production efficiency of the enterprise. Therefore, if you want to continue working for us, you must extend its service life. The maintenance work of mining carts is introduced below.
First of all, the newly installed mine car without test drive should be moved manually or by crane to rotate the mine car 2 or 3 times before starting to avoid collision accidents. Mining carts are not allowed to start on load, which will cause electrical trips or damage to mechanical parts. Therefore, it is necessary to check whether there are ore or iron in the crushing cavity.
Secondly, check the oil level and oil temperature in the fuel tank. If the oil temperature is lower than 20 degrees, you should not drive. At this time, you must use an electric heater or heating water. Check the oil pressure of the lock cylinder, and the adjustment ring can be started under the locked state. After doing the above inspections and making sure that no faults will occur, you can start the minecart according to the following procedure.
Finally, regular maintenance of the mine car will greatly extend its service life.
